Double-Insulated Tools; Extension Cord Usage; Symbols; Unpacking The Wet/Dry Vacuum - Kawasaki 692358 Manual De Instrucciones

DOUBLE-INSULATED TOOLS

In a double-insulated appliance, two systems of insulation are provided instead of
grounding.
No grounding means is provided on a double-insulated appliance, nor should a
means for grounding be added to the appliance.

EXTENSION CORD USAGE

Extension cords are not recommended for use with this wet/dry vacuum. Extension
cords must be UL listed and use a minimum of 18 A.W.G. wiring. Extension cords
should never exceed 25 feet in length. Extension cords, that are too long, cause a
voltage drop over the extra distance causing the wet/dry vacuum motor to run slow-
er with the possibility of causing damage to the motor. Using extension cords with
smaller than the recommended wire gauge run the risk of getting too hot, melting,
and/or causing fires. See table, "Extension Cord Specifications", on page 17.
IMPORTANT: Some of the following symbols may be used on your tool. Please
study them and learn their meaning. Proper interpretation of these symbols will
allow you to operate the tool better and safer.
SYMBOL NAME
V Volts
A Amperes
Hz Hertz
W Watt
Kg Kilograms
Alternating Current
Direct Current
Alternating or Direct Current
Earthing Terminal
Class II Construction
min Minutes
s Seconds
ø
Diameter
No load speed
.../min Revolutions per Minute
1,2,3, ... Ring Selector Settings

SYMBOLS

EXPLANATION
Voltage (Potential)
Current
Frequency (Cycles per Second)
Power
Weight
Type of Current
Type of Current
Type of Current
Grounding Terminal
Denotes Double Insulation
Time
Time
Size of Drill Bits,
Grinding Wheels, etc.
No-load Rotational Speed
Revolutions, Surface Speed,
Strokes, etc. per Minute
Speed, Torque or Position Settings
7

UNPACKING THE WET/DRY VACUUM

1. Remove the wet/dry vacuum out of the package.
2. Unlock the latches and remove the powerhead.
3. Remove the contents from inside the tank and make sure you have all the parts
listed below. If any part is missing, please call Alltrade Tools Customer Service
1-800-590-3723 for assistance.

FUNCTIONAL DESCRIPTION

6 5
20
1
16
7
14
15
CONTROLS AND COMPONENTS:
1. Powerhead
2. On/Off Switch
3. Safety Float Cup
4. Filter Basket
5. Collection Tank
6. Vacuum Port
7. Water Drain Cap
8. Locking Latches (2)
9. Handle
10. Cartridge Filter
11. Casters (2)
12. Extension Wands (2)
COMPONENT
VACUUM CLEANER
DISPOSABLE COLLECTION
FILTER BAGS (3)
REPLACEMENT CARTRIDGE FILTER
17
10
11
23
9
18
2
19
8
4
3
12
13. Flexible Vacuum Hose
14. Disposable Collection Filter Bag
15. Floor Nozzle
16. Multi-purpose Nozzle
17. Cartridge Filter Cap
18. Blow Port (in back)
19. Power Cord Hook
20. Wheels (2)
21.Air Flow Control Hatch
22. Hose Nozzle
23. Power Cord
MODEL NUMBER
841976
841995
841996
8
18
13
21
22