Operating Instructions; How To Boil Water - Tribest GKD-450 Manual De Funcionamiento

4. OPERATING INSTRUCTIONS

HOW TO BOIL WATER

2
MAX
1.7L
1.5L
1.0L
1
0.5L
3
MIN
BOIL
OFF
1. Put the kettle on the base and plug in
the power cord. This puts the kettle into
BOIL/OFF
"stand by" mode. Press the
button one time. The base will buzz once
and the kettle will start heating up.
HOW TO KEEP WARM
MAX
2
1.7L
1.5L
2. Press the
1.0L
1
0.5L
3
MIN
WARM
SELECT
1. Put the kettle on the base and
plug in the power. The kettle
is now in "stand by" mode.
WARM/SELECT
Press the
button once and the kettle will
keep warm. The rated keep
3. If you choose one temperature for keep warm, the
warm temperature is 195ºF
and keeps water warm for 6
hours.
4. When the keep warm function is finished, the kettle
8
MAX
1.7L
1.5L
1.0L
0.5L
MIN
2. After the water has reached boiling
point, the kettle will switch off. Then the
base will buzz 3 times and shift to "stand
by" mode, keeping the water heated to
the preset desired temperature.
195°F
115°F 175°F
WARM
SELECT
160°F
WARM/SELECT button repeatedly to
change the keep warm temperature from 195ºF
to 175ºF to 160ºF to 115ºF. Keep in mind that the
keep warm time is still 6 hours and cannot change.
195°F
WARM
MAX
1.7L
1.5L
SELECT
1.0L
0.5L
MIN
195°F
kettle will keep the water around this temperature
by heating and stopping repeatedly.
will automatically shut off.
4. OPERATING INSTRUCTIONS
HOW TO BOIL & KEEP WARM
1
BOIL
OFF
For boiled water and keeping it warm, use the boiling function first. After the water has boiled,
press the WARM/SELECT button to set your keep warm temperature.
Keep warm setting is same as shown on page 8—How to Keep Warm.
NOTE
• In "keep warm" mode, water is not boiled. The kettle simply keeps the water at the
temperature you set it to.
• If you want to stop the water from boiling or interrupt it briefly, remove the kettle from
the base.
• This appliance comes with a safety device which automatically switches off the heater
element if the appliance is inadvertently switched on when empty, or if it boils dry. In
this case, let the appliance cool down completely before filling with water again.
2
WARM
SELECT
EN
9