Alesis iSymphony M1 Manual De Usuario página 21

5.) Press the
The display will show flashing "READ" as the
player reads the Table Of Contents on the
disc.
After reading the disc the display will show
the total tracks and playing time.
Note:
The reading time may be even longer if you are using CD-RW (rewritable)
discs. This is normal and not an indication of any problem with your unit.
6.) Press the
playback.
"ESP" indicator begins flashing in the display
and stops flashing after a while.
You may turn the "ESP" function "Off" or "On" by pressing the
button on the remote control.
7.) Adjust the VOLUME, DBBS and EQ controls as desired.
8.) Playback will continue until all tracks on the disc have been played, then the
player stops and the display shows the total tracks number and playing time on
the disc.
To stop playback at any time, press the
9.) If you are finished listening, press the
tray, remove your disc from the player, re-close the tray and press the
STANDBY/ON button to return the system to the Standby (Off) mode.
OPEN/CLOSE button to close the CD tray.
PLAY/PAUSE button to begin
STOP button.
OPEN/CLOSE button to open the CD
1
ID3/FM ST./ESP