How To Use - DREVO Calibur V2 PRO Manual De Instrucciones

EN

How to Use

WIRED MODE
1. Insert the Type-C port to the keyboard and the USB port to the PC/MAC.
2. Make sure the switch is on Wired Mode.
OFF Wired Mode
3. Press FN+A to Windows OS mode or FN+S to Mac OS mode.
4. The keyboard is ready to use as a wired keyboard. In addition, its battery will
automatically start charging on wired mode.
WIRELESS MODE
1. Slide the switch to the Wireless ON position.
ON Wireless Mode
2. Press FN+Q/W/E/R/T to choose a profile.
e.g., press FN+Q. The keyboard blinks twice indicated that you have chosen the
profile successfully.
3. Long-press FN+P for 3s to pair.
When the "P" key starts blinking, it indicates that the Bluetooth is ready to pair.
4. Turn on the Bluetooth of your device and then search and connect "Calibur V2
PRO".
5. Connected successfully.
The "P" key stopped blinking indicate that the Bluetooth pairing is successful.
Similarly, you can pair and connect 5 Bluetooth devices by FN+Q/W/E/R/T. Besides,
you can switch over the 5 Bluetooth devices freely.
NOTE:
For best results, please fully charge your Calibur V2 PRO before using it for the first
time; A depleted battery will be fully charged in about 6 hours.
If the Calibur V2 PRO hasn't been used for an extended period or doesn't respond
in wireless mode, you may need to recharge it before use.
In wireless mode, you will use it via a Bluetooth5.0 connection, and the Calibur
PRO will automatically start charging when the USB-C cable is plugged in.
3
背光 RGB
材质 ABS
轴体 青/红/茶/黑
连接方式 USB 有线
12个月有限质保
质保
(无人为损坏)
Windows XP/VISTA/7/8/10,
支持系统
Mac OS, Linux
Bluetooth Devices Switch
WIN/MAC Switch Hotkey
Win Mac
Lock/Unlock Windows key Reset Keyboard
330mm
包装内含
1* 键盘
1* 贴纸
1* 拔键器
1* USB type-c线
1* 用户手册
1* 防尘罩
1* 售后卡
Sidelight setting
Brightness/Speed
adjustment
FN组合键图示表
4
简体
37mm
Backlight
Setting
Backlight Color
Switching