Greenlee LBC-10B Manual De Instrucciones página 4

Important Safety Instructions
8. Do not operate charger with damaged cord or
plug; replace them immediately.
9. Do not operate charger if it has received a sharp
blow, been dropped, or otherwise damaged in any
way; take it to qualified service personnel.
10. Do not disassemble charger; take it to quali-
fied service personnel when service or repair is
required. Incorrect reassembly may result in a risk
of electric shock or fire.
11. To reduce the risk of electric shock, unplug
charger from outlet before attempting any main-
tenance or cleaning.
12. The charger and battery pack are specifically
designed to work together. Do not attempt to
charge any other cordless tool or battery pack
with this charger.
13. Do not attempt to charge the battery pack with
any other charger.
14. Do not attempt to disassemble the battery
charger and the battery pack housing.
15. Do not store battery pack in locations where
the temperature may reach or exceed 122 °F
(50 °C) (such as a metal tool shed, or a car in the
summer), which can lead to deterioration of the
storage battery.
16. Do not charge battery pack when the temperature
is BELOW 32 °F (0 °C) or ABOVE 104 °F (40 °C).
This is very important.
17. Do not incinerate the battery pack. It can explode
in a fire.
18. Avoid dangerous environment. Do not use charger
in damp or wet locations.
19. The charger is designed to operate on standard
household electrical power only. Charge only on
the voltage indicated on the rating plate. Do not
attempt to use it on any other voltage!
20. Do not abuse cord. Never carry charger by cord or
yank it to disconnect from outlet. Keep cord away
from heat, oil and sharp edges.
21. Charge the battery pack in a well ventilated place;
do not cover the charger and battery pack with a
cloth, etc., while charging.
22. Use of an attachment not recommended may
result in a risk of fire, electric shock, or personal
injury.
23. Do not short the battery pack. A battery short
can cause a large current flow, over heating and
create the risk of fire or personal injury.
24. NOTE: If the supply cord of this appliance is
damaged, it must only be replaced by a repair
shop authorized by the manufacturer, because
special purpose tools are required.
25. TO REDUCE THE RISK OF ELECTRIC SHOCK, THIS
APPLIANCE HAS A POLARIZED PLUG (ONE BLADE
IS WIDER THAN THE OTHER). This plug will fit in
a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician to
install the proper outlet. Do not change the plug in
any way.
4