Graef MS 61 Manual De Instrucciones página 23

Milk frother MS 61 / MS 62 / MS 80 / MS 85
important!
The froth making process can-
►
not be manually interrupted.
► If unintended actions were
taken, pull the mains plug
from the electric socket and
lift the tank out of the base
station.
Let the unit cool off between
►
uses.
Making milk froth
Connect the unit to the mains
supply:
Remove the cap and insert the
‹
attachment for warm or cold
milk froth.
Fill the desired amount of milk
‹
in the tank.
important!
Comply with the "max"
►
mark. Never fill any more
milk than that into the tank.
Frothed milk expands; if the
filling level is too high it will
overflow the tank.
Put the cap on the tank.
‹
Start preparation
‹
ing the corresponding
button. The LED is illuminated
as long as the unit is running.
important!
►
‹
‹
‹
Warming up milk
Warming up milk differs from
making milk froth in the following
points:
‹
‹
important!
►
‹
by press-
"on"
© Gebr. Graef GmbH & Co. KG - 02
Preparation stops automat-
ically after 60 - 90 seconds,
depending on the filling
level.
Open the cap after preparation
has finished and pull it up.
Pour or ladle the milk froth into
a cup or glass.
After using the unit, clean it as
described in the Cleaning and
Care chapter.
Remove the attachment for milk
froth.
Fill the desired amount of milk in
the stainless steel tank.
Comply with the "max"
mark. Never fill any more
milk than that into the
tank.
The rest of the steps are identi-
cal to making warm milk froth.
EN
23