Proper Use; Technical Data - Gardol GETS-E 710 Kit Manual De Instrucciones Original

3. Proper use

The chainsaw with telescopic handle is designed
for lopping off tree branches. It is not suitable for
extensive sawing work, felling trees or sawing any
materials other than wood.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains voltage: ................................ 230 V ~ 50 Hz
Power rating: .............................................. 710 W
Cutter bar length: .................................... 200 mm
Max. cutting length: ................................. 180 mm
Chain pitch: ..................................... 3/8", 33 teeth
Chain thickness:.......................... (0,043") 1,1 mm
Sprocket wheel: ................................ 5 teeth, 3/8"
Cutting speed at rated rpm (vu): .................13 m/s
Oil tank capacity: ..................................... 110 cm
Weight excluding accessories: ...................4,3 kg
Chain: . Oregon 90JG033X, 90PX033X, 91P033X
Cutter bar: . Oregon 084LNEA041, 080NDEA041
Protection class:............................................. II/
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN ISO 11680-1.
L sound pressure level ..................... 87.8 dB(A)
pA
K uncertainty .......................................... 2.5 dB
pA
L sound power level ..................... 104.7 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
L sound power level guaranteed ....... 106 dB(A)
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Anl_GETS_E_710_Kit_SPK7.indb 21 Anl_GETS_E_710_Kit_SPK7.indb 21
GB
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN ISO
11680-1.
Handle under load
Vibration emission value a
K uncertainty = 1.5 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
3
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
- 21 -
= 1.537 m/s
2
h
2
21.04.16 14:03 21.04.16 14:03