Multifunction Button; Operation Of The System - Alcad 2637030 Manual De Usuario

MULTIFUNCTION BUTTON

Some of the buttons of the monitor can have several functions. When one of the functions of
the buttons is different from that shown in the icon of the monitor, this function is indicated
on the screen.

OPERATION OF THE SYSTEM

NO CALL. MONITOR ON STAND-BY
If the monitor does not receive a call the functions of door opening and of communication
with the street entrance panel are disabled. It is possible to activate the automatic switch-on
system or to make an intercom call to another monitor inside the same dwelling.
RECEIVING A CALL. MONITOR ACTIVATED
An audio signal from the monitor will be heard when a call is received from the entrance
panel. Following the screen will switch on and show the image of the person who has called.
You have 30 seconds to answer.
When the communication button
who is calling. Conversation time is limited to 60 seconds.
A few seconds before the conversation time elapses, you will hear a series of beeps. You can
prolong the conversation time from your own dwelling by pressing the conversation button
twice, or, from the entrance panel, by having the visitor call again. The conversation will
end when the communication button is pressed once, or when the conversation time runs out.
The system will then revert to being on standby.
Push the corresponding button to open the door
property.
During the time periods for answering the call or for conversation, the system does not permit
any other monitor to use the auto switch-on function.
VIDEODOOR ENTRY SYSTEM MONITOR
is pressed, communication is established with the person
Multifunction indicators
of the buttons
Icons
and allow the person access to the
ENG - 9