HQ-Power VDPDP134D Manual Del Usuario página 7

3. Press the UP/DOWN-button to scroll to block/single menu, and tap menu to enter the block/single mode.
VDPDP134D
2. Press the menu button to enter the submenu system. You can use the UP/DOWN
buttons to select block/single.
[Block]: The complete dimmer (all 6 channels) has only one start address.
[Single]: The DMX address of each channel is selectable, several channels can select the
same DMX addresses.
4. In block mode, you can use the up/down button to select the start address from [001-512].
5. In single mode, press MENU to select between channel and address.
6. When the channel is activated, press the UP/DOWN button to select from [1-6], when
the address is activated, press the UP/DOWN button to select from [001-512].
7. Press the ESC button to exit.
+
7 VELLEMAN