Preset Scan; Preconf. Scan; Auto-Scan - Televes RSD - 7118 Instrucciones De Uso

User Manual

10.3.- Preset Scan

To carry out the channel scan of the default programmed transponders of
your receiver, press the OK button on the option -Preset Scan- on the
"Installation" menu.
The options to be selected are:
Satellite
To select one of the satellites, use the V+/V- buttons, or press OK to
activate the popup menu .
Scan Mode
Indicate if you wish to scan for all the satellite channels (All) or only
those broadcast openly (Free) during the satellite sweep.
Scan Channel
Select the type of channels to scan for among "TV channels", "Radio
channels" or "TV and Radio channels".
Search
Press the OK button on this option to start the channel search on the
transponder programmed for that satellite.
The channels found will be added to the list.
If you wish to halt the search process before its end, you should press the
EXIT button on the remote control.
10.4.- Auto Scan
To carry out a complete channel scan on any of the satellites of your installa-
tion, press the OK button on the -Auto Scan- option of the "Installation"
menu.
The options to select from are the same as those of the previous item.
When you press the OK button on the "Search" option a scan of all the
available channels on the selected satellite will begin.
If you wish to halt the search process before its end, you should press the
EXIT button on the remote control.
58
"RSD - 7118"