Qlima WDZ 510 Instrucciones De Uso página 31

• Insert the power cord plug in the wall socket.
The Vacuum cleaner is now ready to use.
• Press the on/off switch 5 to switch it on.
Blowing function:
Put hose end into the blower outlet connection 14. The air will now blow through the
nozzle.
Take care when using blower function. Dust and other residue are blown away in
an uncontrollable way!
3. USAGE
• T urn the machine on or off with on/off switch 5
WDZ 530 ONLY:
• WDZ530 has a special on/off I – 0 – II switch (see picture: P13)
• Switch on the WDZ530: Press the on/off button to I or II.
• I = machine is ON, auxiliary electrical power socket is ON.
• 0 = vacuuming is OFF and power socket is ON
• II = Vacuuming is OFF and power socket is ON.
- Switch on the tool: vacuuming automatically will start in 1 second
- Switch off the tool: the vacuuming will automatically stop in 10 seconds
- Switch tool back on: vacuuming automatically will start in 1 second
- S witch off the tool again: the vacuuming will automatically stop in 10
seconds
- Etc etc
USAGE ALL MODELS:
• When the container is full:
• Empty the container and clean it thoroughly
• W hen it feels difficult to vacuum more dust, the filter needs to be taken out and cleaned.
See P11.
• Control suction power by opening-closing the sliding button on the tube handle.
FLOOR BRUSH:
WDZ510/520: are equipped with the standard floor nozzle suitable for wet and dry
vacuuming
WDZ530: is equipped with the special QLIMA brush. See Picture 3b. The QLIMA brush can
be adopted for hard floor or for soft-/carpet floor by pressing the button on top of the
brush.
4
31