Volume; Main Menu; Setting The Reception Area; Radio Mode - Blaupunkt PHILADELPHIA 845c Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 141
Startup | Radio mode

Volume

Adjusting the volume
You can adjust the volume in steps from 0 (off ) to 50
(maximum).
u Turn the left rotary/pushbutton
volume.
Muting the car sound system (Mute)
u Briefl y press the left rotary/pushbutton
the device or to reactivate the previous volume.

Main menu

In the main menu, you press the buttons on the touch-
screen to call up the diff erent sources and operating
modes.
u Press the SRC button
4
- or -
u In the current source, press the [ ......
The main menu is displayed.
As long as you do not select a new audio source, the
last active audio source is played back.
Note:
You can also call up another source directly from
within the current source.
u Press the SRC button
4
to change between sources.
The selected source is called up after approx. 2 sec-
onds.
Note:
The fi gures used in these instructions are intended
to facilitate the explanations and details may deviate
from your device.
30
02_Philadelphia845_gb.indd 30
02_Philadelphia845_gb.indd 30
5
to change the
5
to mute
for approx. 2 seconds.
] button.
briefl y once or several times

Setting the reception area

This car sound system is designed for operation in diff er-
ent regions with diff erent frequency ranges and station
technologies. The factory default of the reception area is
"Europe". If you operate the car sound system outside of
Europe, e.g. in the US or Asia, you may fi rst have to set a
suitable reception area in the menu:
u Press the SETUP button
7
- or -
u In the main menu, press the Settings button.
The settings menu is displayed.
u In the bottom area of the settings menu, press the
General button.
The current setting is displayed behind "Radio region".
u Press the Radio region button to display the list of
available reception areas.
u Use [
] or [
] to scroll through the list and tap on
the desired reception area to select it.
The list is hidden, the selected reception area is set.
u Press the [ Settings
] button.
The main menu is displayed again.

Radio mode

Start radio mode

u Press the RADIO button
1
- or -
u Press the SRC button
4
repeatedly until the Radio
source is selected.
- or -
u In the main menu, press the Radio button.
The radio menu is displayed.
.
.
27.08.14 14:10
27.08.14 14:10

Publicidad

Tabla de contenido
loading

Tabla de contenido