Maintenance Of The Product - Prilux 965521 Instrucciones De Montaje

GIANT CONE
CODE
965521
14m
13m
12m
11m
10m
9m
8m
7m
6m
5m
4m
3m
2m
1m
0m

MAINTENANCE OF THE PRODUCT

ALL PRILUX CHRISTMAS LIGHTING MOTIF, NEED A
MAINTENANCE BEFORE BEING USED, IT MEANS TO
CHECK ALL THE CONNECTIONS (INCLUDED THE END
CAP) IN ORDER TO BE SURE THAT THE MATERIAL HAS
THE PERFECT TIGHTNESS.
10m
• MODULE 1 (peak):
Made in 1 complete module, with anchors for the winds.
Measurements: 200 (height) x 0.87cm base
Vertical: 8 tubes of 30x20x1,5cm
Bottom ring: Iron tube 30x20x1,5cm
• MODULE 2:
Made in 1 complete module.
Measures: 200 height) x 1.65cm base
Top ring: Iron tube 30x20x1,5cm
Vertical: 8 tubes of 30x20x1,5cm
Bottom ring: Tube 30x20x1.5cm
• MODULE 3:
Made in 2 parts.
Measures: 200 height) x 2.42cm base
Top ring: Iron tube 30x20x1,5cm
Vertical: 14 tubes of 30x20x1,5cm
Bottom ring: Tube 30x20x1.5cm
• MODULE 4:
Made in 4 parts.
Measures: 200 height) x 3.20cm base
Top ring: Iron tube 30x30x1,5cm
Vertical: 20 tubes of 30x30x1,5cm
Bottom ring: 40x40x2cm tube
• MODULE 5:
Made in 4 parts.
Measures: 200 height) x 3.97cm base
Top ring: Iron tube 40x40x2cm
Vertical: 24 tubes of 40x40x2cm
Bottom ring: 40x40x2cm tube
• ANCHORS (30x6 Plate Clamps):
-Union module 1 with module 2: 4 clamps
-Union module 2 with module 3: 6 clamps
-Union parts module 3: 4 clamps
-Union module 3 with module 43: 6 clamps
-Union parts module 4: 8 clamps
-Union module 4 with module 5: 8 clamps
-Union parts module 5: 8 clamps
DESCRIPTION
GIANT CHRISTMAS CONE 10m
3,97m 4,74m
BEFORE STARING THE INSTALLATION OF THIS PRO-
DUCT , PLEASE READ ATTENTIVELY THE INSTRUCTIONS
AND KEEP THEM IN A SAFE PLACE.
THE INSTALLATION SHOULD BE PERFORMED BY QUA-
LIFIED PERSONNEL.
THE IMPROPER HANDLING OF THE COMPONENTS
OR THE PRODUCT COULD DAMMAGE THE CORRECT
FUNCTIONING OF THIS DEVICE THUS CANCELLING
THE WARRANTY OF THE PRODUCER
THE WARRANTY OF THE PRODUCER IS CANCELLED IF
THE INSTALLATION IS NOT PERFORMED FOLLOWING
THE INDICATED IN REBT 2002.
THE APPLICATION ITC BT09-4 OF THE REBT IS MAN-
DATORY (INSTALLATION OF OVERVOLTAGE PRO-
5,52m
TECTORS OF IN LINES AND RECEIVERS) FOR INDUS-
TRY INSTALLATIONS AND PUBLIC LIGHTING. THE
WARRANTY DOES NOT COVER DAMMAGES PRO-
DUCED BY OVERVOLTAGE ON RECEIVERS WITHOUT
OVERVOLTAGE PROTECTORS.
THE APPLICATION OF ITC BT19 ( INTERIOR OR RECEI-
VING INSTALLATIONS.GENERAL PRESCRIPTIONS) IS
MANDATORY.
THE APPLICATION OF ITC BT34 (INSTALLATIONS FOR
SPECIAL PURPOSES. FAIRS AND STANDS) IS MANDA-
TORY.
PRECAUTIONS:
• This product is suitable for use both indoors and outdoors.
• Under no circumstance, should you cut, change or reduce it.
• If the product is defective, it must be disposed.
• Throw away properly any defective product.
• Never place or use this product close to heat sources.
• Disconnect the electrical current before installing this product.
• In case of technical questions, ask always to qualified staff.
• The product should not be modified because any modification nullifies
safety approvals and can make it dangerous. The manufacturer declines
any responsibility for modified or installed incorrectly products.
ASSEMBLY INSTRUCTIONS:
1. Before starting the assembly, have the boxes of each module located.
2. First, let's join module 5 (base). Attach the 4 parts to each other with 8
clamps. In this module there will be a door to access the interior to electrify
3. The next module would be 4. Attach the 4 parts together with 8 clamps.
4. Attach the module 5 with the module 4 to each other, with 8 clamps.
5. The next step is to join module 3, which has 2 parts. To do this, use 4
clamps.
6. Attach the module 5 with the module 3 to each other, with 6 clamps.
7. Attach the module 3 with the module 2 to each other, with 6 clamps.
8. Finally, connect module 2 with module 1 (peak) to each other, with 4
clamps.
9. From top to bottom, attach the supplied BRANCH, securing it with the
fixing system you want, such as flanges (not supplied). To hold it, you must
help with the rods that have the structure every 20cm.
Nº SECTIONS
5
WARNING