Pentair Water KREEPY KRAULY Legend LL505G Manual De Instalación página 10

EXAMPLE OF HOSE ASSEMBLY
BEFORE CUTTING TO LENGTH
FARTHEST POINT OF POOL PERIMETER FROM WALL FITTING
EXAMPLE OF FINISHED HOSE ASSEMBLY
AFTER CUTTING TO LENGTH
MARKED SWIVEL
10
[English]
LEGEND ® INSTALLATION MANUAL
STEPS
1. With the feed hose assembly attached to the pool wall, hold the feed hose assembly by the opposite
end with the soft hose and walk the perimeter of the pool to locate the farthest point on the perimeter
from the wall fitting without stretching the hose assembly.
2. Measure the distance that the hose assembly extends beyond the pool perimeter farthest point
located in Step 1 — (7½ ft. [2,3 m] in this example).
3. Cut half of the length obtained from Step 2 — (3¾ ft. [1 m.] in this example), equally from each of the
10 foot (3 meters) lengths of white or grey hose on either side of the marked swivel.
WALL FITTING
SWIVEL
10 FOOT (3 METER)
WHITE OR GREY
HOSE SECTION
MARKED SWIVEL
10 FOOT (3 METER)
WHITE OR GREY
HOSE SECTION
10 FOOT (3 METER)
SOFT HOSE
WHITE OR GREY
HARD HOSE SECTION
WHITE OR GREY
HARD HOSE SECTION
SOFT HOSE
(Cut to your pool depth)
BACK UP VALVE
REMOVE EXCESS MATERIAL
FROM HOSE ON EITHER SIDE OF
MARKED SWIVEL AS DESCRIBED
IN STEPS 2 AND 3.
FLOATS
FLOATS
SWIVEL
FLOATS
STEPS
4. Reassemble the hoses using the supplied mender nuts as shown in FIGURE 1.
5. Your complete finished hose assembly should look like this. The end of the 30 inch
(75 cm) soft hose should reach just to the furthest edge of the pool perimeter as shown.
FURTHEST POINT OF POOL PERIMETER
FROM WALL FITTING
BACK UP
VALVE
7½ FT. (2,3 M.)
EXAMPLE DIMENSION
(Your Measurement May Differ)
NOT TO SCALE
WHITE OR GREY
HARD HOSE SECTION
(WALL FITTING SIDE)
MARKED SWIVEL
WHITE OR GREY
HARD HOSE SECTION
(CLEANER SIDE)
END OF
SOFT HOSE
(End remains 30 in. [75 cm])
FIGURE 1