Noise/Vibration Information - Bosch GWS Professional 18V-10 PC Manual Original

24 | English
Angle grinder
®
Bluetooth
Signal interval
D)
Max. signal range
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
C) The mobile terminal devices must be compatible with Bluetooth
(GAP).
D) The signal range may vary greatly depending on external conditions, including the receiving device used. The Bluetooth® range may be signi-
ficantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).

Noise/Vibration Information

Noise emission values determined according to EN 60745-2-3.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection
Total vibration values a (triax vector sum) and uncertainty K determined according to EN 60745-2-3:
h
Grinding surfaces (roughing):
a
h
K
Grinding with abrasive disc:
a
h
K
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
1 609 92A 4B2 | (09.05.2018)
GWS 18V-10 PC
Bluetooth
(Low Energy)
s
m
®
Low Energy devices (version 4.2) and support the Generic Access Profile
GWS 18V-10 PC
3 601 JG3 E..
dB(A)
dB(A)
dB
2
m/s
2
m/s
2
m/s
2
m/s
Fitting
Using the GCY 30-4 Bluetooth
Module
Note: The GCY 30-4 Bluetooth
able as an accessory with GWS 18V-10 PC power tools; it is
included in the scope of delivery for GWS 18V-10 PSC
power tools.
Read the corresponding operating instructions for informa-
tion about the GCY 30-4 Bluetooth
Charging the Battery
Use only the chargers listed on the accessories page.
u
Only these chargers are matched to the lithium-ion bat-
tery of your power tool.
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
GWS 18V-10 PSC
® ®
4.2 Bluetooth 4.2
C) C)
(Low Energy)
8 8
30 30
GWS 18V-10 PSC
3 601 JG3 F..
79 79
90 90
3 3
5.0 5.0
1.5 1.5
3.5 3.5
1.5 1.5
®
Low Energy
®
Low Energy Module is avail-
®
Low Energy Module.
Bosch Power Tools