Zwilling ENFINIGY 53005 Manual De Instrucciones página 15

GB
Only plug the appliance into a cor-
rectly installed, earthed socket that
any leaking water cannot access.
Only operate the appliance if the
voltage stated on the rating plate
matches the voltage of your socket.
The appliance has a high power
consumption. For this reason, do not
connect the appliance to multiple
sockets or extension cables.
Make sure that the power cord is
not kinked or pinched and make
sure that the power cord and the
appliance do not come in contact
with sources of heat (e.g. hobs, gas
flames).
When unplugging the power plug
from the socket, always unplug the
power plug directly. Do not carry
the appliance by the power cord.
Never touch the power plug and
the base with wet hands.
Do not allow liquids to come into
contact with the base. Take the
water container off the base when
filling it.
If the base comes into contact with
liquids, unplug the power plug, soak
up the liquid and let the base dry.
Never touch the base with metal
objects when it is plugged in. Do not
insert any objects into the openings
on the appliance.
Do not remove the water container
www.zwilling.com
from the base when it is switched
on and ensure that the appliance
is switched off when placing the
water container on the base.
As long as the power plug is
plugged in, there is a voltage inside
the appliance, even if the appliance
is switched off.
After every use and in the event
of danger or a defect, unplug the
power plug from the socket immedi-
ately. For this reason, keep the sock-
et into which the appliance's power
plug is plugged easily accessible at
all times.
Unplug the appliance from the sock-
et prior to cleaning it.
Never unscrew the appliance and
do not make any technical modifica-
tions.
Never immerse the appliance in
water or other liquids, do not clean
it under running water and never put
it in the dishwasher.
When the appliance is switched
on, there is a risk of scalding from
boiling water or hot steam:
Always guide the cable through the
cable bushing on the underside of
the base to ensure that the appli-
ance is stable.
Fill the water container to the MAX
marking at most, and never above,
as otherwise hot water could spray
Safety
15