Amann Girrbach giroform Instrucciones De Servicio página 11

Technical data:
d/w/h:
Weight:
Power connection:
Laser class:
ADJUSTING THE DRILLING DEPTH
The burr rests on a slotted screw in the center of
the axis. Clockwise turns lower the screw = tighter
drill hole; counter-clockwise turns raise up the screw
= wider drill hole. The wider the drill hole, the far-
ther the pin tip juts out of the plinth plate.
250 x 183 x 370 mm
9,6 kg
230V 320W
3A < 5mW
O P E R AT I N G I N S T R U C T I O N S
Delivery volume:
Art. No.
176701 Giroform Pin Drill
176710 Giroform tungsten carbide burr
176733 Impression carrier
176702 Tubular socket wrench
176703 Fixing pin
176004 Screw driver for centric adjustment
172306 Chuck
176713 Plate support universal
Optional accessory:
Art. No.
176711 Plate support for plates Quadrant
176712 Plate support for plates L
176722 Plate support for plates XL
REPLACING THE BURR
Unplug the power cable. Insert the fixing pin from
the side into one of the holes of the drilling axis.
Turn the tubular socket wrench in counter-clockwise
direction to unscrew the sleeve nut. Then, remove
the defective burr.
EN
11