Creating User Account; Connecting A Bluetooth Headset To The Dguard - digades dguard Instrucciones De Uso

INSTALLING THE dguard

3.6 Creating user account

To use the dguard
1. Download and install the dguard
Play Store or for iOS from the App Store.
2. Enter the data by either scanning the QR code in the app or by enter-
ing the ICC ID and serial number. The ICC ID and the serial number
(SN) can be found on the mudule label and on the Quick Start Guide.
EN
3. Check or enter your personal data.
4. The vehicle data (VIN, vehicle type, fuel type) are requested. These
can be found in the vehicle registration document and on the motor-
cycle (see vehicle manual).
5. Click on continue to save the data and a push message appears as
soon as the SIM is activated. Switch on the ignition, a further push
message appears to confirm that the system has been successfully
put into operation. Watch out for reception.
3.7 Connecting a Bluetooth headset to
the dguard
20
SYSTEM
®
system, you need a user account.
®
INFO
Log in to the app for the first time with a new user ac-
count. The app will then guide you through the process of
unlocking the system.
system
®
INFO
We recommend that you use a headset.
If your Bluetooth headset is not connected, you cannot
speak to the emergency coordination centre in the event
of an emergency call. Naturally, the emergency call with
your GPS coordinates can be made without a Bluetooth
headset.
app for Android from the Google
®