Vivanco CHS 5000 Instrucciones De Uso página 4

GB
CHS 5000
Congratulations on purchasing your new Vivanco product. This wireless RF speaker
system operates using the latest digital transmission technology. Enjoy your favourite
music or favourite films in pure, noise-free stereo quality without inconvenient cable
connections in your surroundings.
A Transmitter
1 On/Off switch
2 Channel selection button
3 Audio input
4 AC adapter connector
5 AC adapter
6 Audio jack cable
7 RCA adapter
8 Stereo jack adapter 3.5mm to 6.35mm
B RF speaker
1 Power-on lamp
2 Fitting for wall mounting
3 Battery compartment lid
4 Channel selection button (CHANNEL)
5 On/Off switch and volume control
6 AC adapter connector
Important information
Please read these operating instructions carefully and keep them in a safe place.
The AC adapters are designed for these devices only. Do not use the supplied AC
adapters with other devices.
Do not use the devices near water or in damp places.
Avoid exposure to extreme heat or strong light.
Do not open the housings or the AC adapters (danger of electric shock!).
Check whether the local mains voltage corresponds to the voltage indicated on the
AC adapter.
Avoid touching the battery contacts. Do not touch the contacts with metal objects.
Do not cover the devices (e.g. with a towel, sheet, etc.)
Clean the devices using a moist cloth and never with aggressive cleaning agents.
Constant use at high volumes impairs your hearing and may cause permanent
damage.
Preparing your RF speaker
1. Place the transmitter near to your hi-fi system, your TV or another audio source.
2. Connect the small AC adapter marked "FOR TRANSMITTER" to the connector on the
transmitter, then plug it into a mains socket.
3. Connect one end of the audio jack cable to the audio input of the transmitter and the
other end to the headphones output or a Line-Out / Rec-Out output.
8
GB
4. Switch on the transmitter using the On/Off switch. The On/Off switch lights up when
the transmitter is on.
5. Connect one of the large AC adapters marked "FOR SPEAKER" to the AC adapter
connector of the one RF speaker, then plug into a mains socket.
6. Switch on the RF speakers using the On/Off switch. The power-on lamp lights up.
7. Turn the volume control to a middle position.
8. Press the channel selection button to find the optimal transmission channel.
9. Proceed in the same way with the second RF speaker.
10. Your devices are now ready for operation and transmission begins automatically
when music is played on your audio source.
Explanation of functions
Auto-tuning
Should interference be received, press the channel selection button on the transmitter.
The transmitter then automatically searches for another of the eight possible channels.
Then press the channel selection button on the RF speakers and the RF speakers will
adjust to the new transmission channel.
Wall mounting
The RF speakers can also be mounted on a wall. Please note the distance between the
holes on the rear of the speakers.
9