Maintenance - Porta-Nails 465SLT Manual De Instrucciones

These steps are provided as a simple guideline for proper installation technique . Should you
encounter a situation not covered here or have additional questions regarding the 465SLT
Pneumatic Floor Stapler & Nailer and its use please contact us at 866-435-8665 . Should you
require detailed information regarding wood looring installation we suggest you contact:
Maple Flooring Manufacturers Association, Inc.- 847-480-9138

MAINTENANCE

Note: The information contained in this Manual is designed to assist you in the safe maintenance
of the Tool . Some illustrations in this Manual may show details or attachments that differ
from those on your own Tool .
MAINTENANCE AND INSPECTION - Read section titled "SAFETY" (page 4-7)
WARNING
1. Disconnect air hose and remove all fasteners from Tool when:
• doing maintenance and inspection; and
• clearing a jam .
2. Resetting the Piston / Driver Blade Disconnect from the Air source.
• Unload all of the fasteners from the magazine .
• Make sure there are no fasteners in the guide chamber .
• Reconnect the air source to the Tool .
• Load fasteners and proceed with the operation of the Tool .
3. Inspecting the Magazine
• DISCONNECT THE AIR HOSE
• Clean the magazine . Remove dust or wooden debris which may have accumulated in the
magazine .
4. Storing
• When not in use for an extended period, apply a thin coat of the lubricant to the steel parts
to avoid rust .
• Do not store the Tool in a cold weather environment . When not in use, the Tool should be
stored in a warm and dry place . Keep out of reach of children.
MODIFICATIONS:
Porta-Nails Tools are constantly being improved and modified to incorporate the latest
technological advancements . Accordingly, some parts (i .e .: part numbers and/or design) may be
changed without prior notice .
CAUTION
Repair, modification and inspection of Porta-Nails Power Tools must be carried out by a Porta-
Nails authorized service center. This Parts List will be helpful if presented with the tool to the
Porta-Nails authorized service center when requesting repair or other maintenance. In the
operation and maintenance of power tools, the safety regulations and standards prescribed in
each country must be observed.
National Wood Flooring Association- 800-422-4556
Visit their web site http://www.woodfloors.org.
Visit their web site http://www.maplefloor.org.
or
18