CYLINDER VALVE
BLACK COUPLING NUT
turn clockwise to connect
REGULATOR
9
PRESSURE
RELIEF VALVE
BLEED-OFF
VALVE
turn clockwise
to reseal
17
12
Securing the propane tank
7. Place propane gas tank (not included)
into the metal stand (9). Make sure
the gas tank sits on the metal stand (9)
completely. Turn the preassembled wing
screw on the outer part of metal stand
(9) clockwise to secure the propane gas
tank tightly.
Attaching the regulator
8. Turn the cylinder valve on the tank
clockwise to close the propane tank.
Attach the preassembled regulator
from the table top (2) to the cylinder
valve by turning the regulator coupling
nut clockwise. Make sure it is fastened
securely and tighten connections by
hand only.
Installing the battery
9. Remove the rubber cap on the
electronic igniter (17) by unscrewing
and slide battery (12) into the battery
slot. Make sure the positive side of
the battery faces outwards. Screw the
electronic igniter cap (17) over the
battery tightly.
Assembly instructions
9