Kettler DAYTONA Instrucciones Para El Montaje página 6

GB
■
Caution: While assembly of the product keep off children's reach (Choking hazard -
!
contains small parts).
■
Concerning products with pneumatic tyres: tighten the valve caps at all times and keep
!
off children's reach (Choking hazard - contains small parts).
Handling
■ Before use always check that all screws and plug-in connections and respective safety devi-
ces fit correctly.
■ Instruct children in the correct use of the product, and draw their attention to possible dan-
gers.
■ Please note that pedals on any wheeled toy without freewheeling appliance will turn even
if the product is being pushed or is coasting.
■ This wheeled toy does not have a so-called parking brake. Therefore secure the vehicle
against rolling away. Do not leave children, who are not old enough to use the wheeled
toy, unattended on a product.
■ If this product can be adjusted please adapt it to your child's height.
■ Do not transport anything on this product.
■ Never use corrosive or abrasive substances to clean the toy. Never use substances which
may cause pollution of the environment.
■ Lubricate the bearing sleeves of the wheels and the handlebars with a few drops of oil
every two or three months.
■ For models with pneumatic tyres: When leaving wheeled toys with pneumatic tyres on
floors containing solvents or which have been glued with such solvents (e.g. PVC) they may
possibly stain it due to a chemical reaction with the natural product caoutchouc. If in doubt
place something underneath the wheels. Ensure that air pressure in the tyres is correct (1,7
bar/24 PSI); if air pressure is too low this increases wear, and makes riding the toy more
difficult!
Assembly of the toy vehicle
■ Please ensure that the vehicle will only be used for playing when assembly has been car-
ried out correctly, and checked, by an adult.
■ The toy vehicle must be assembled carefully by an adult person. Study the assembly instruc-
tions carefully before beginning work. Assemble the vehicle in the exact sequence shown
by the letters in the diagrams. This is essential for the safe function and use of the toy vehi-
cle.
■ Please note that there is always a danger of injury when working with tools or doing manu-
al work. Therefore please be careful when assembling this machine.
■ Ensure that your working area is free of possible sources of danger, for example don't
leave any tools lying around. Always dispose packaging material in such a way that it
may not cause any danger. There is always a risk of suffocation if children play with pla-
stic bags!
■ Bolt all the parts together loosely at first, and check that they have been assembled cor-
rectly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tigh-
ten nuts completely against resistance (locking device). Then check that all screw connec-
6