INSTRUCTIONS
Your new Catadioptric or Reflex mirror lens is a
highly developed computer designed product.
using the merits of both reflex optics and refraction
optics. This gives you very sharp picture quality with
less color aberration, which is considered the most
harmful factor in the field of telephoto photogra-
phy.
Required T-mount
The proper T-mount is required in order to attach
the lens to your camera. Each camera system re-
quires a different T-mount adapter.
Mounting your lens
The T-mount is similar in design to the standard
lens normally purchased with your camera, and
is coupled and removed in the same manner. To
mount the lens, attach the T-mountadapter to your-
camera andthen simply attach the lens to the adap-
ter.
Focusing the lens
Focusing is accomplished while viewing the subject
through the viewfinder of your camera and rotating
the focusing ring. Since the aperture is preset, you
will find under certain light conditions a shadow
appearance on the split-image section of your focu-
sing screen. In this case, simply focus on the edges
of your subject with the outer center of your prism.
NOTE: In order to compensate focusing when nor-
mal focusing position may differ due to extreme tem-
perature change, the focusing ring has been designed
to allow rotation beyond tilefixed engraved marks
of the distance scale. To avoid error, focusing should
always be made while looking through the view-fin-
der.
EN
FR
ES
3