Machine Components - Collomix CMG 1700 Manual De Servicio

Machine components

EN
1 Handle
2 Button for disk locking
3 Hose connector Ø 35 mm
4 Hood segment for opening
5 Lamellar ring
6 Flange nut
7 Diamond cup wheel
8 Coupling nut
9 Dust hood
10 Screws for handle adjustment
11 ON/OFF switch
12 Electronic signal indicator
13 Ventilation openings
14 Mains cable with plug
Intended use
The concrete grinder is designed for grinding and
Only for commercial use in trade and industry.
ures and data which you received with this device.
grinding, deburring and smoothing of uneven ar-
eas on concrete surfaces, for removing formwork
ring may become clogged up when working on
Only use cup wheels recommended by the manu-
facturer. The use of other cup wheels can over-
strain the power tool, damaging the bearings and
The concrete grinder may only be used in connec-
The user is liable for any damage caused by im-
proper use.
CE - Declaration of conformity
We declare under our sole responsibility that this prod-
uct complies with the following standards and stand-
Gaimersheim, 16.03.2016
Managing Director
Technical documentation can be requested from:
Collomix GmbH
Dept. Technical Development
Daimlerstr. 9, 85080 Gaimersheim, Germany
Technical data
Concrete grinder
Rated input power
Voltage:
Frequency:
Idling speed 1. Gear:
Cup wheel diameter:
Weight without disk:
Noise/ vibration levels
60745.
CMG 1700
-
-
CMG 1700
-
-
WARNING:
The measurement values stated apply for new de-
NOTE
ured in a standard test procedure in compliance
of power tools. It can also be used for a prelimi-
in accord-
Rev. 3 / 10
Sound power
L L
Uncertainty K = 3 dB
[m/s 2
n
4,9 m/s 2
Uncertainty K = 1.5 m/s
2
CMG 1700
230-240 Volt
50/60 Hz
9600 min -1
125 mm
3.2 kg
q / II
-
-
-