Orbegozo PHE 85 Manual De Instrucciones página 20

PHE 85
3. Use 4 screws M5X8 to assemble burner on cylindric
housing.
5. Put bottle inside cylindric housing and connect the gas
regulator to it. Assure the bottle with the belt inside
the housing to avoid tipping over.
6. Leak check. You must check it before first use, each year and when you replace any gas component
as hose or regulator. Don't smoke while you are checking gas leak and remove all ignition fonts
nearby. Put knob in OFF position. Open the gas valve of regulator. With a solution half-by-half of
4. Place protective guards on burner. Use dome nut M6
to fit the guards on their position.
20