Philips GC4800 Serie Manual De Usuario página 21

Problem Possible cause
The iron is not hot
enough.
Water You have not closed
droplets drip the cap of the filling
onto the opening properly.
fabric during
ironing.
You have put an
additive in the
water tank.
The set
temperature is
too low for steam
ironing.
You have used
the steam boost
function at a
temperature setting
below 3.
Water drips You have put the
from the iron in horizontal
soleplate position with water
after the still left in the water
iron has tank.
cooled
down or has
been stored.
Solution
Set an ironing temperature at
which the steam boost function
can be used ( 3 to MAX). Put
the iron on its heel and wait until
the temperature light has gone
out before you use the steam
boost function.
Press the cap until you hear a
click.
Rinse the water tank and do not
put any additive in the water tank.
Set a temperature of or 2
higher.
Set the temperature dial to a
setting between 3 and MAX.
Empty the water tank.
ENGLISH
21