Symbols Used; Packaging/Storage; Machine Description - TMR TMR55 Manual De Uso

A
No. TMR.... Turbine description
1 Power on switch
2 Rating label
3 Air electronic regulation (TMR 80,
TMR 140,.....)
4 Motor air filters
5 Air supply tube
6 Air supply tube (spray gun)
7 Painting spray gun (optional – see the brochure
EN
about spray guns / accessories)
8 Supply cable
9 Transport handle
Dear Customer,
We want to thank you for choosing this product. Our company is a leading reference point in the field of the construction of
painting machinery and systems. Our company has always meant great reliability, quality and safety. All our products have
been designed and manufactured to guarantee the best performance ever. We feel confident we have further improved
working standards and we are certain we have met all safety requirements, because our units have the DECLARATION
OF CONFORMITY to European Directives.
1 INFORMATION LETTER AND USE OF THE MANUAL
This use and maintenance manual is an integral part of the machine and the user must have knowledge of its content.
Although the main features of the machine described in this manual are not subject to change, our company reserves
the right to change those components, details and accessories it deems necessary to improve the machine or to meet
manufacturing or commercial requirements, at any time and without updating this manual immediately.
ALL RIGHTS ARE RESERVED. The reproduction of any part of this manual, in any given form, without prior written
authorization from our company, is strictly forbidden.

2 SYMBOLS USED

It represents the operations which might be dangerous if not performed correctly.
It represents the operations which, in order to avoid risks, must be performed by trained and authorized personnel.
All personnel in charge of using the machine must be thoroughly trained; all the above information must be thoroughly
understood and applied.

3 PACKAGING/STORAGE

To transport the machine, it is packaged in a cardboard box. All optional components (pipes, filters, fittings, etc.) are placed
with the machine, in the same cardboard box. When storing the machine, make sure the surrounding temperature remains
included between – 15° and 40°C. Also make sure the humidity values in the storage area remain included between 30
and 80%.
4 INSPECTION OF PURCHASED PRODUCT
The original configuration of the painting machine cannot be changed at all. Original accessories and spare parts
always guarantee all safety regulations.
When receiving the machine check that:
- The package is intact and without damages.
- All the documentation, necessary for the correct installation and use of the machine, is present.
- The pipe does not present damages or cuts which could compromise its functioning.
In case of damages inform the reseller.
The blowing unit is delivered with the following standard components:
3 m. flexible hose (only for TMR55 and TMR80).
7 m. flexible hose (only for TMR140).
2 Spare air filters.
1 Use manual with Declaration of Conformity and Warranty.

5 MACHINE DESCRIPTION

Spray painting machine able to supply a great low-pressure air volume (HVLP), characterized by great practicality, versatility
and simplicity of use. The air flow rate can be adjusted (in the models TMR80, TMR140, TMR90E, TMR150E and TMR180E),
D
No. TMR....E Turbine control panel description
1 Main switch on for network presence
2 Power on / standby button
3 Red led on in stand-by
4 Green leds on for power in use
5 Power / Air / Pressure increase button
6 Power / Air / Pressure decrease button
E
No. Radio control description
1 Red led flashing on and off command sent
2 Power on button
3 Power off button
4 Power increase button
5 Power decrease button
- 8 -
THE MANAGEMENT