Using Tripod - Nikon PROSTAFF 3 Manual De Instrucciones

Using Tripod

En
n How to Use the Camera Platform
1) Rotate the panhandle 1 counterclockwise to move
the camera platform up, down, left, and right.
CAUTIONS
Be careful not to rotate the panhandle 1 too far
counterclockwise, as it will disconnect.
2) Rotate the scope base stopper 2 counterclockwise
to change the angle of the scope.
3) After setting the position, rotate the panhandle 1
and scope base stopper 2 clockwise to lock them.
n How to Use the Elevator
1) Rotate the elevator stopper 3 counterclockwise, and
move the elevator stopper while holding the base of
the camera platform 4 . Rotate the stopper clock-
wise to lock the stopper at the desired height.
12
4
2
1
3
Fig. 3
n How to Extend or Open the Legs
1) You can extend or contract the legs freely by setting
up the flip lock lever 1 and lock the legs by setting
down the lever. The legs fold out in three stages.
Stretch the legs in order from the top stage.
2) When opening the legs, hold leg A and slowly open
leg B. The three legs are opened at the same time.
When closing the legs, lift up the stay 2 a little from
the bottom so that the legs can be closed smoothly.
En
1
Fig. 4
B
2
A
Fig. 5
13