Lubrication - Heiniger Xperience/D Manual De Instrucciones

1.5 - 2 mm
Fig. 9
► Work only with sharp clipping blades and replace dull blades and blades with missing
teeth. Proper sharpening of clipping blades is only possible by an expert using
specialised equipment. When faced with the need to sharpen the blades, contact your
service centre.

6.6 Lubrication

Fig. 10
Possible damage to the clipper!
Insufficient oiling of the clipping head will lead to warming and will shorten the life of the
clipper and its blades.
► Oil the clipping blades adequately during the clipping session, at least once every 15
minutes, so that they do not run dry.
► Use only the special oil supplied or a paraffin oil meeting the ISO VG 15 specification.
Cattle clipper Xperience
Install the new lower blade. Align it so that the
‹
polished surface of the lower blade protrudes
approx. 1.5 - 2 mm beyond the tips of the upper
blade.
Tighten the comb plate screws.
‹
NOTE
To obtain a well-clipped animal and to increase the
life of the device including the clipping head, it is
necessary to apply a thin coat of oil between the
upper and lower blades. All other moving parts of
the clipping head must also be lubricated.
Apply some drops of oil onto the clipping blades
‹
and into the lubrication opening.
NOTICE
31