Technical Specifications - Optika XDS-3 MET Manual De Instrucciones

5.0 MAInTEnAnCE
Hold to the bulb by wrapping it with a cloth or using gloves. Do not touch the halogen bulb with bare
hands.
Please insert the lamp gently. The lamp may be damaged by excessive pressure.
See section 3 for more information.
Replacing the fuse
Before replacing the fuse, turn the main switch (4) to "0" (off) and unplug the power cable.
rotate the fuse support out of the holder using a straight screwdriver. Insert a new fuse in the support,
then rotate the support back into the holder.
Fuse rating: 0V, 3.1A.

6.0 TECHnICAL SPECIFICATIOnS

HEAd
EYEPIECE
nOSEPIECE
OBjECTIVES
MAGnIFICATIOnS
FOCUSInG SYSTEM
STAGE
dIAPHRAGMS
ILLUMInATIOn
FILTERS
OPERATIOn EnVIROnMEnT
TrInOCuLAr, 30° InCLInED, 30° rOTATIng
WF10x/MM HIgH - POInT
 POSITIOnS
LWD PLAn IOS MET (nO COVEr SLIDE) IOS x/0.1, 10x/0.,
0x/0., 0x/0.
0x, 100x, 00x, 00x
COAxIAL COArSE AnD FInE
0x30MM; MECHAnICAL STAgE WITH LOWErED ErgOnOMIC
COAxIAL COnTrOLS.
x-y rAngE: 11x1MM.
FIELD AnD APErTurE DIAPHrAgMS (CEnTrABLE).
1V/0W HALOgEn BuLB In ExTErnAL CASE. CEnTrABLE BuLB
AnD BrIgHTnESS COnTrOL.
BLuE, FrOSTED, POLArIzEr & AnALySEr.
InDOOr uSE.
ALTITuDE: MAxIMuM 000 M.
TEMPErATurE: °C~0°C (1°F~10°F)
MAxIMuM rELATIVE HuMIDITy: 0% AT 31°C (°F), THEn LInEAr
DErATIng:
0% AT 3°C (3°F), 0% AT 3°C (10°F), 0% AT 0°C (10°F).
POLLuTIOn DEgrEE:  (rEFEr TO IEC0).
Page 1