Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 95
Manual tuning of related regional
stations
1. This function works when AF is on and REG is
off.
Note:
• This function is effective when related regional
stations are received.
2. Press one of Preset buttons ! to recall a
regional station.
3. If the receiving condition of a recalled station is
bad, press the same Preset button !. The unit
switches to a related regional station.
TA (Traffic Announcement)
When the unit is in the TA standby mode, you can
listen to traffic announcements preferentially
when they start, irrespective of the function mode.
You can also tune in to TP (traffic programme) sta-
tions automatically.
● To set the TA standby mode
If you press TA button 7 when only "TP" is lit in
the display, "TP" and "TA" light in the display and
the unit is set to the TA standby mode until traffic
announcements start.
When traffic announcements start, "TRA INFO"
appears in the display, and then PS (Programme
Service Name) appears.
If you press TA button 7 while traffic announce-
ments are being broadcast, they are cancelled
and the unit enters TA standby mode.
● Cancelling the TA standby mode
If you press TA button 7 when "TP" and
"TA""are lit in the display, "TA" in the display
goes off and the TA standby mode is cancelled.
● Setting the auto tuning mode for TP stations
If you press TA button 7 when only "TP" is lit or
"TP" and "TA" are not lit in the display, "TA" lights
and the unit automatically tunes in to TP stations.
Note:
• The unit continues to tune in automatically if no TP
station is received. Press TA button 7 again to
stop auto tuning.
Auto store function for TP stations
● Auto storing while "TA" is lit:
Only TP stations are auto stored.
* Refer to PS/AS function in radio mode.

PTY function

This function enables you to listen to selected pro-
gramme type, irrespective of the function mode.
• PTY broadcasts are not yet available in all coun-
tries.
In TA standby mode, TP stations have priority over
PTY broadcasting stations.
* Emergency messages interrupt all modes of oper-
ation. They can only be received from RDS sta-
tions. "ALARM" appears in the display and mes-
sage can be heard.
* Press AF button 9 to cancel the ALARM broad-
casts.
RDS Operations
13

Publicidad

Tabla de contenido
loading

Tabla de contenido