INAC LAC-1 Instrucciones Para Montaje Y Uso página 3

Instructions Instrucciones
Please read and save these instructions
GB
Dear Customer,
Thank you for choosing a INAC product. We hope your new appliance with your
expectations.
We suggest you read this document carefully in order to ensure that the appliance
operates properly.
This document informs you on how to proceed in the event of a failure.
Nevertheless, there is no need to worry, because Inac enjoys a qualified network
of service engineers and our after-sales service can be found close to vour home.
However, please accept our advice: If the machine does not seem to be working
properly, before calling the service engineer there are a number of things you
might check by simply using this booklet.
And ultimatelv saving time and money. If despite these checks, your appliance is
still not running properly, there is no need to worry: The Inac after-sales service
is fast, trustworthy and always willing to help!
INAC Electrónica para radiocomunicaciones P.O. 3101
Tel. +34 976 322 822 http://inac-radio.com e-mail: inac@inac-radio
Gebrauchs Instructions
50080 Zaragoza España
Pág.: 4
Instructions Instrucciones
IntroductIon
INAC has created a command of small but practical dimensions to control the actua-
tion of a remote variable capacitor 180 degrees of torque, with fast and immediate
response. This allows us to control "real time" the turning of a shaft away with the
feeling of direct contact of our hands.
The power and angle is determined by the servomotor model chosen. Being in the
market a variety of models with different technical features, both in the ability to work
as in the degree they are able to rotate.
The manual contains connection diagrams of the major brands of servo motors and
how they are in appearance and size.
The knob on the rear connector provides an output of three drivers.
They are: the voltage required to move the servo motor and its power control unit and
a digital signal 5 Vpp, of variable width that determines the position of 0 degrees and
a maximum of 180 degrees, for servo motors that we recommend for the operation of
a variable capacitor.
In turn, the control limits activity to just the moments that is powering the button in
reception or transmission line if the output power not exceeding 5 W of carrier. After
reception or transmission tuned, leaving the command to operate the actuator stays in
last position. In the event that you try the performance of the servo motor with radio
frequency carrier than the margin of 0.1 to 5W, control electronics will be blocked and
will not react until no excessive levels of radio frequency carrier.
INAC Electrónica para radiocomunicaciones P.O. 3101
Tel. +34 976 322 822 http://inac-radio.com e-mail: inac@inac-radio
Gebrauchs Instructions
50080 Zaragoza España
Pág.: 5