Philips HR3868 Manual Del Usuario página 17

Problem
Why does the jar become
scratched and cloudy?
Why does the smoothie
become warm after
blending?
When the blender stops
working and the message
"Hot" displays, what does
it mean?
There is foam coming out
of the blender. What did I
do wrong?
When you are grinding
a small amount of
ingredients, they may get
stuck to the sides of the jar.
How can I add ingredients
when the blender is
running?
What is the function of the
small lid?
Solution
If the jar is used for grinding dry ingredients, the jar
wall will be scratched and become cloudy. There is no
negative impact on the blending performance and no
food safety concern. It is still safe to use.
Due to the high speed motor, the friction of blade will
make the ingredients warm. It is normal. To obtain a
cool smoothie, you can add ice cubes or frozen fruits.
The overheat warning LED (thermometer icon) lights
up when the blender is overloaded. If the blender
continues working with heavy load, the message "Hot"
displays when it is fully overloaded. The blender will
automatically stop working.
Note: if the temperature of the appliance is too high or
the appliance is overused, the message "Hot" displays
directly and the blender will also stop working.
To reset your blender in case of overload and auto
stop protection, follow the steps below:
Switch off the blender and then unplug it.
1
Remove some of the ingredients to reduce the load.
2
Allow the appliance to cool down for 30 minutes.
3
Connect the power plug to the wall outlet and switch
4
on the blender.
The quantity you put in the jar was too large. When
processing foaming ingredients, do not fill the jar
beyond two thirds of its overall capacity.
In that case you must:
Switch off the appliance.
1
Open the jar.
2
Remove the ingredients that are blocking the blade
3
unit with a spatula or by adding some liquid.
Close the jar and switch the appliance on again to
4
ensure that the ingredients are processed equally.
You can add liquids through the small hole in the lid.
When you want to add solid ingredients, switch the
blender off first.
During processing, you can remove the small lid to
1
add liquid and solid ingredients
Switch the blender off before adding solid
2
ingredients
You can also use the measuring cup to measure
3
ingredients
EN
21