Demo Mode; Progressive Start; Automatic Stop; Information Center - Cyclo Vac HD Serie Manual De Instrucciones

Your HD unit is equipped with a special module allowing for a smooth and gradual
start-up of the vacuum system, to prolong motor durability.
In case you've forgotten to turn off your unit, or it's been turned on by mistake,
it wil automatically shut off after one hour of uninterrupted use.
Your unit is equipped with an electronic timing device that will recommend proper
maintenance of your HD unit. This signal is only a suggestion and do not indicate
a problem with your unit. It will not stop or hinder the use of the system.
c
d
1
2
e
3
f
4

DEMO MODE

Demo mode: to initiate a demonstration of the information center on the power
unit, press the reset button
press the reset button

Progressive Start

Automatic Stop

Information Center

– indicates hours the unit has been operated
– maintenance of the power unit is required
in the next 200 hours of use.
Turbine – Without movement – unit is connected to
a power source
Movement – unit is turned on - operating
Reset – to stop the flashing icons, press the reset button
for one second.
f
for 5 seconds. To stop the demonstration, simply
f
.
/ 15