Troubleshooting - Craftsman 125.46756 Manual Del Usuario

PROBLEM
Tool will not turn on.
The saw is sluggish and/or
cuts out.
Motor overheats.

TROUBLESHOOTING

CAUSE
Battery is defective.
Switch is dead.
Brushes are worn out.
Worn/damaged saw blade.
Too much force applied.
Cooling vents are clogged with
sawdust or debris, or are being
covered by hand during operation.
13 ― English
SOLUTION
Replace with new, charged battery.
Tool must be replaced.
Tool must be replaced.
Check the blade and replace with a
new blade if necessary.
Decrease the applied force.
Clear vents with compressed air.
Do not cover vents with hand during
operation.