Led Display On The Battery And The Charger, Cleaning And Care, Maintenance And Repair - ALFRA AKKU-COMPACT FLEX Manual De Instrucciones

LED DISPLAY ON BATTERY AND CHARGER
LED 1
Quick charger
LED 1 and LED 2 on the charger
LED red
LED green
LED red/green
LED red
No signal
LED on the battery
LED off
LED red
LED red
CLEANING AND CARE
Regular cleaning and care will extend the lifetime of your hydraulic punch driver and the lithium ion battery.
We recommend the following measures:
• Regularly remove dirt and abrasive dusts from the sliding surfaces and moving parts.
• When the punch driver is no longer used, press the return button to release the pressure.
• Check the battery charge status regularly. Recharge the battery when its capacity is too low.
• Store and use the punch driver in a dry place.
MAINTENANCE AND REPAIR
The hydraulic punch Akku-Compact Flex
punching cycles and at least once a year by the manufacturer to ensure safe operation. Should you need
a replacement device during this time, please contact the ALFRA customer service.
!
Unauthorized repairs or modification to the punch driver are not permitted!
LED 2
Li-Ion battery
Battery is being charged
Battery is charged completely and operative
Battery is defective
Temperature error inside the battery
warm up or cool down
No electrical contact battery inserted correctly? Check contacts
No error Punch driver is operative
Battery capacity very low (ca. 10%)
Battery flat charge / replace battery
Punch Driver should be maintained and serviced after 10.000
®
contact the customer service
allow the battery to
charge / replace battery
remove battery
17