Dörr LB-6575 LED Manual De Instrucciones página 4

gb instruction mAnuAL
Lb-6575 LeD Photo box with Dimmer
thAnk you for the purchasing of a DÖRR product.
Please read the safety hints and the instruction manual carefully before starting to use
the photo box. keep the instruction together with your photo box.
sAfety hints
• Make sure that there is enough ventilation during operation of the photo box. After use, disconnect the photo
box from the power.
• Do not touch the electronic parts with wet hands.
• Protect the photo box from rain, humidity and extreme temperatures.
• Make sure to use the supplied AC adapter only for operation of the photo box.
• In case the photo box proves defective or damaged, do not attempt to disassemble the electronic parts or to
repair the device – contact a local specializing trade or service point.
• Do not use benzene or abrasive cleansers to clean the photo box. We recommend to use lint-free damp micro fibre
tissue to clean the fabric tent. Wipe the LED surfaces occasionally with a soft and dry tissue. Disconnect the photo
box from power for this purpose.
• Store the photo box at a dust free, dry and cool space.
• Keep away from children.
• DÖRR will not be liable for damages caused by improper use or non-observance of the safety hints and instructions.
ProDuct DescriPtion
the Lb-6575 LeD photo box with dimmer grants an optimum, diffuse and complete illumi-
nation for product photography, e.g. for jewellery, glasses and more without any disturbing
shadows and reflections.
chArActeristics
• Pop-up function for fast and simple set-up
• Constant colour temperature of 5600 K
• High colour reproduction
• High quality and long-lasting LEDs avoid the generation of extreme heat and ensure
soundless work
• Brightness can be dimmed using the control unit
• Supplied with two synthetic backgrounds of black and white colour
nomencLAture
1 Fabric tent with Velcro cover
2 Diffusor
3 Velcro fixture for diffusor
4 2 LED rails with cable
5 Rubber loops for LED rails
6 Control unit (dimmer) with socket and 2 connector plugs
AC Adapter with 2 connector plugs
7
8 Opening for cable connection
9 Opening for shootings from the top
4 clips to fix the background
10
11 Loops for clips (front below, above behind)
12 Synthetic backgrounds (black and white)
1
6
7
3 2 4 5 5 4
3
10/11 8 9 10/11
10/11 12
instructions for set-uP
Before set-up, make sure that you have enough space around you.
WARnIng: The tent comes with a pop-up function, i.e. it will unfold automatically when you
let it go. In order to avoid injuries, remove the fabric tent carefully out of the transportation
cover and hold it firmly. Now hold it away from your body and let it go. It now pops up!
3
3
10/11
4
mounting the synthetic
bAckgrounDs
Hook 1 each of the clips (10) at the front
below and above behind as well as at the
two lower left and right front loops (11).
Now clamp the background at top and
bottom using the clips.
mounting AnD LeD rAiLs AnD cAbLe
connection
Slide the LED rails (4) into the rubber loops
(5). The cable connection points backwards,
the LEDs to the front. Pass the cable
through the small rear opening of the fabric
tent.
mounting the Diffusor
in order to avoid reflections, it is
essential to mount the diffusor (2).
Therefore, fix the Velcro stripes of the
diffusor onto the Velcro holders (3) at all
four top edges of the photo box.
cAbLe connection ViA Ac ADAPter
(constant, full illumination performance)
Connect the cables of the LED rails with the
two connector plugs of the AC adapter (7).
Connect the AC adapter to mains supply.
This way you can achieve a constant and
full power illumination.
cAbLe connection ViA controL unit
(Dimmer)
Connect the cables of the LED rails to the
two connector plugs at the control unit (6).
Then connect the single plug of the control
unit with one of the connector plugs of the
AC adapter (the second plug remains off
function). Connect the AC adapter to mains
supply. Now you can control brightness by
pressing the +/- keys of the dimmer.