Cleaning And Storage; Technical Specifications; Scope Of Delivery - Dörr VL-26 Manual De Instrucciones

05 | OPERATION
1. Connect the USB A plug (03a) of the USB cable (03) to the USB socket of a PC/Notebook.
Alternatively connect the LED ring light with a powerbank (optional) or an USB mains adapter (optional) to run over AC. When
connected correctly, the On/Off button (04a) at the control unit (4) lights up blue.
2. Press the On/Off button (04a) on the control unit (04) to switch on the LED ring light.
Press button – (04b) to reduce the brightness in 9 steps.
Press button + (04d) to increase the brightness in 9 steps.
3. Choose between the different colour temperatures, warm light (approx. 3200 K) – cold light (approx. 5600 K) and mixed light
(approx. 4400 K) with button colour temperature (3c).
4. Turn off the ring light after use with the On/Off button (04a) and disconnect from any USB power source.

06 | CLEANING AND STORAGE

Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft, slightly damp microfiber cloth to clean
the outer parts of the device. Before cleaning make sure to switch off the device and take off from power supply! Store the device in
a dust-free, dry and cool place. This device is not a toy - keep it out of reach of children. Keep away from pets.

07 | TECHNICAL SPECIFICATIONS

Number of LEDs
Illumination power approx.
Colour temperature approx.
Colour Rendering Index (CRI)
LED Power
Power supply
Outer diameter approx.
Inner diameter approx.
For smartphone width approx.
Height with table tripod approx.
Height mini tripod approx.
Length USB cable approx.
Weight approx.

08 | SCOPE OF DELIVERY

1x LED ring light
1x Ball head
1x Table tripod
1x Mini tripod
1x Smartphone holder
1x Knurled screw
9
120
max. 480 Lux/1m
Cold light: 5600 K / Mixed light: 4400 K / Warm light: 3200 K (± 200 K)
> 83 Ra
18 W
USB, 5V 2A
26 cm
20 cm
60-85 mm
42 cm
min. 15,5 cm / max. 24,5 cm
190 cm
455 g
doerr-foto.de