Dealing The Metallic Lid - OBO Bettermann GES R2 Instrucciones De Montaje

Installing/mounting the GES R2 floor socket
11 7 2

Dealing the metallic lid

Danger from ingressing water!
If the lid is improperly selected or handled, water can ingress into the
CAUTION
installation socket .
Contact injuries and damage to property are possible due to short cir-
cuits .
Only install those lids in wet-care floors which are approved for wet care
(tube body lid, metallic hinged lids and blanking lids) .
All metallic lids must also be stuck to the base using a suitable sealing
agent (see Fig . ) .
Note! Carefully check the correct mounting position. Once locked, the lid
can only be dismantled with great difficulty.
See Fig . :
1 . Seal the perimeter of the installation socket 2 with the sealing
agent 3 .
2 . Engage the lid 1 in the installation socket .
GES R2 EN | 37