Technical Characteristics; Lcd Screen - babymoov NutriBaby A001111 Instrucciones De Uso

Ocultar thumbs

Contenido

página de 29

/ 29
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

A001111-Nutribaby-Notice_Mise en page 1 31/07/15 10:30 Page16

• Nominal voltage: 120 V

• Frequency: 60 Hz

• Heats up to three baby bottles at the same time

• Heats baby food jars sizes

• Sterilises up to three baby bottles at the same time

a. Cooker lid

b. Cooking basket

c. Removable cooking tray

d. Cooking juices receptacle

e. Insulating grill

Heating time or baby

bottle capacity selector

Meaning of the function icons

Heat a cold

baby bottle

Steam cook

A1. Connect the cooker to the blender.

A2. Remove the cooking juices receptacle.

A3. Pour 2 fl oz. (60 ml) of water into the tank using the measuring marks on the mixing bowl (level C).

A4. Remove the trays from each steam basket.

A5. Stack the trays, and place them on the base of the Nutribaby.

A6. Place the baby bottles on the insulating grill above the water tank.

A7. Place the lid on the cooker.

A8. Turn on using the On (I) /Off (O) switch on the back of the blender. The LCD screen on the front of the Nutribaby lights up.

A9. Press the "Mode" button one or more times to choose the desired function.

- If cold water is to be heated, select the baby bottle + refrigerator icon

- If lukewarm water is to be heated, select the baby bottle + house icon

A10. Press the + or – buttons to select the quantity of water to be heated.

A11. Press OK to start.

A12. At the end of the cycle, an alarm will sound to inform you that the baby bottle is ready. Press OK to turn off the alarm.