Safety Precautions - HQ EL-PILRLA90 Manual De Uso

3. The LEDS in serial can function when all the seals are in place.
4. Please don't remove or connect with the other lamp when powered on.
5. When the LEDS in serial are damaged, you need an experienced technician to repair them using
LEDS of the same rating.
Please confirm with the professional installation.
Please cut off the power supply before installation and removal operations. Make sure that you have
cut off the power for safety purposes.
Improper operation will cause malfunction, and the manufacturer does not take any responsibility for
such abuse.
Specifications:
Solar energy battery board:
Using life:
LED:
Accumulator:
Illumination time:
Installation height:
Work delay time:
Detection distance:
Detection range:
Power adapter:

Safety precautions:

Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or
damage caused due to incorrect use of this product.
General:
- Designs and specifications are subject to change without notice.
- All logos brands and product names are trademarks or registered trademarks of their respective
holders and are hereby recognized as such.
- This manual was produced with care. However, no rights can be derived. König Electronic can not
accept liability for any errors in this manual or their consequences.
- Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products
should not be mixed with general household waste. There is a separate collections system for
these products.
10V/2.5W single crystal silicon
exceeds 20 years
45pcs white high luminance
1.2V* 4PCS 3600mAh (nickel hydrogen battery)
3.5h
1~3m
2~5sec (min), 1min+10sec (max)
8m max (<24°C)
180°
DC7.8V 400mA
To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician when service is required.
Disconnect the product from mains and other equipment if a
problem should occur. Do not expose the product to water or
moisture.
6