Garantia; English; Kfr130N Trimmer; Important - WEGOMA KFR 130N Manual De Instrucciones

con di cio nes de servicio.
10. ACCESORIOS OPCIONALES
1140123 Fresa de radio 2 mm c/rdto. M.D.
1140106 Fresa de radio 3 mm c/rdto. M.D.
1140109 Fresa de radio 6 mm c/rdto. M.D.
1140110 Fresa de radio 8 mm c/rdto. M.D.
1222084 Pinza Ø 6 mm
1222024 Pinza Ø 8 mm
1222085 Pinza Ø 6,35 mm (1/4")
5600050 Cabezal CA56G
6446073 Acoplamiento aspiración estándar 3,5
m.
11. NIVEL DE RUIDOS
Las mediciones de esta herramienta eléctrica
has sido efectuadas según Norma Europea
EN50144.
El nivel de ruidos en el puesto de trabajo puede
so bre pa sar 85 dB (A). En este caso es necesario
tomar medidas de protección contra el rui do para
el usuario de la he rra mien ta.

12. GARANTIA

Todas las máquinas electroportátiles WEGOMA
tie nen una garantia vá li da de 12 meses a partir
del día de su su mi nis tro, quedando excluidas
todas las ma ni pu la cio nes o daños ocasionados
por ma ne jos in ade cua dos o por desgaste natural
de la má qui na.
Para cualquier reparación, dirigirse al servicio ofi cial
de asistencia téc ni ca WEGOMA, S.A.
WEGOMA se reserva el derecho de modi fi car sus
pro duc tos sin previo aviso.

English

KFR130N TRIMMER

IMPORTANT

CAUTION. Read these OPERATING INSTRUC-
TIONS and the attached GENERAL SAFETY
INSTRUCTIONS LEAFLET carefully before using
the machine. Make sure you have understood them
before operating the machine for the fi rst time.
Keep both sets of instructions for any future
queries.
1. SAFETY INSTRUCTIONS
FOR THE TRIMMER USE
1. WARNING! Carefully read the GENERAL SAFE-
TY INSTRUCTION LEAFLET enclosed with the
machine documents.
2. Supply voltage must be the same as that indicated
on the specifi cations plate.
3. Keep hands away from the cutting area. Hold
fi rmly the machine when working.
4. Use always Virutex original bits. Never use
malformed or broken bits.
5. Always use bits with the correct size of shank
for the chuck being used and adjust the velocity
of the tool.
6. WARNING! Unplug the machine from the
electrical outlet before carrying out any handling
operations.
2. SPECIFICATIONS
Input power.................................................750 W
Equivalent measured continuous
acoustic pressure level.........................88 dB(A)
Acoustic power level.............................101 dB(A)
Usual level of vibrations (hand-arm).......<2,5 m/s
No-load speed...........................14000-30000/min
Chuck collet................................................8 mm
Weight........................................................1,6 Kg
3. STANDARD EQUIPMENT
Inside the box you will fi nd the following items:
• FR156N trimmer fi tted with dust collector con-
nection bit for 3 mm radius and 8 mm shank
diameter.
• A/f key: 11 mm for the motor shaft.
• A/f key: 19 mm for the chuck collet.
• Head bases with a pitch diameter of 26 and 30.
4. GENERAL DESCRIPTION
OF THE KFR130N TRIMMER
The main function of the machine is the fi nishing of
PVC, melamine and wooden edges. These may be
straight and angled or curved, depending on the bit
used. Shaped fi nishes can also be obtained using
different WEGOMA bits with bearings. The machine
is fi tted with a dust collector connection for attaching
our AS182K and AS282K dust collectors or any
other industrial dust collector, using the standard
dust collector attachment (Ref. 6446073).
5. ADJUSTMENTS
WARNING! Unplug the machine from the electrical
outlet before making any adjustments.
To adjust the bit outlet, loosen knob B on the head,
regulate screw A to move the bit and then fasten it
in place again (Fig. 3).
6. STARTING UP THE MACHINE
To start the machine, press button E forward (Fig.
1) to the on position. To stop the machine, simply
press the back of the switch and it will return to
the off position.
The electronic control enables you to work at the
2
-1
5