Power Dynamics PDC-60 Manual De Instrucciones página 7

Instructions for remote control
1 2
1. Open the battery compartment.
2. Insert the batteries AAA(UM-4). Make sure to match + and – markings of the batteries to the marks in the battery
compartment.
3. Close the battery cover.
NOTE: Improper use of the batteries may cause battery leakage and corrosion. To operate the remote control correctly, follow
the instructions below:

Do not insert batteries into the remote control in the wrong direction.

Do not charge, heat, open or short-circuit batteries. Do not throw batteries into a fire.

Do not leave dead or exhausted batteries in the remote control.

Do not use different types of batteries together or mix old and new batteries.

If you do not use the remote control for a long period of time, remove the batteries to avoid possible damage from
battery corrosion.

If the remote control does not function correctly or the operating range becomes reduced, replace all batteries with new
ones.

If battery leakage occurs, wipe the battery liquid from the battery compartment, then insert new batteries.
The batteries can be used for one year in normal condition.
OPERATION OF THE REMOTE CONTROL
Distance: within 7m from the front of the remote control sensor.
0
Angle: within 30 each direction of the front of the remote sensor.
CAUTION:
● Do not drop or shock the remote control.
● Do not put heavy objects on top of the remote control.
● Do not spill water or other liquids on the remote control.
● Do not open the remote control.
3
7