Operation - Little Journey HE161313 Manual Del Usuario

Video Baby Monitor
1. Pairing the Camera to the Monitor
a. Press and hold the power button located on the left side of the monitor
for 3 seconds to turn on the monitor. Your camera will automatically
connect to your monitor as Camera 1 by default.
NOTE: If the camera is not connected to the monitor, press and hold the pairing
button on the base of the camera for 5 seconds to pair
2. Disconnecting the Camera
a. Press and hold the pairing button on
the base of the camera for 5 seconds
to disconnect the device. Camera
disconnected symbol will appear on
your LCD Screen, indicating device is
disconnected.
Menu Settings
NOTE: Your most recent selection is kept in memory and will be highlighted
when navigating the menu in the future
3. Brightness Settings
a. Press
b. Press
c. Press
d. Press
4. Room Temperature Settings
Set your desired MIN and MAX room temperature settings. Alarm will sound
if the temperature exceeds your MAX temperature settings, or is below your
MIN temperature settings
a. Press
b. Press
Temperature using the
c. Press to return and repeat the step above and navigate to
your MIN Room Temperature as well as other temperature settings
- Temperature displayed in Celsius
°C
- Temperature displayed in Fahrenheit
°F
- Activate Room Temperature Alarm
ON
NOTE: When Room temperature is activated, temperature icon and degrees will
display at the top of the LCD Screen
- Deactivate Room Temperature Alarm
OFF
- Room Temperature Calibration: Set your current Room Temperature
.
AFTER SALES SUPPORT
10
800-372-5715
USA
and navigate to
to adjust to desired LCD Screen brightness
to select and save settings
to exit Menu setup
and navigate to
to and press
HIGH
customercare@balcolifestyle.com
using buttons
using buttons
to change to your desired MAX Room
buttons

Operation

to set
LOW