Removing The Built-In Rechargeable Battery; Specifications - Panasonic ER‑GK80 Manual De Instrucciones

Removing the built-in rechargeable battery

Remove the built-in rechargeable battery before
disposing of the main body.
The battery is to be disposed of safely.
Please make sure that the battery is disposed of at an
officially designated location if there is one.
This figure must only be used when disposing of the
main body, and must not be used to repair it. If you
dismantle the main body yourself, it will no longer be
waterproof, which may cause it to malfunction.
• Remove the main body from the AC adaptor.
• Press the power switch to turn on the power and then
keep the power on until the battery is completely
discharged.
• Perform steps 1 to 8 and lift the battery, and then
remove it.
• Take care not to short circuit the positive and negative
terminals of the removed battery, and insulate the
terminals by applying tape to them.

PB017156 - ER-GK80 _(01GB)_12-05-18.indd 19







For environmental protection and recycling of
materials
This main body contains a Nickel‑Metal Hydride
battery.
Please make sure that the battery is disposed of at an
officially assigned location, if there is one in your
country.

Specifications

See the name plate on the AC
Power source adaptor.
(Automatic voltage conversion)
Motor voltage
1.2 V
Charging time Approx. 1 hour
Airborne
63 (dB (A) re 1 pW)
Acoustical Noise
This product is intended for household use only.
19
2018/12/6 16:47:24