Glow Fire Humboldt Serie Instrucciones De Montaje página 11

Connect boards 6 and 8 to board 4 using two wooden dowels. Then mount board 7 and
screw it to the body from step 2.
• Install the resulting body on the pre-assembled base 9, use the remaining wooden dowels
for this
• The element 10 is available in two versions, each with a differently sized cutout. Choose
the right one for your water vapor cassette.
• You can now carefully insert the water vapor cassette in element 10. Due to the structural
properties of the fireplace insert in relation to the screws inserted on the side, slight
damage to the edge of the element 8 cannot be ruled out. This has no influence on the
optics and the function. Lack of lacquer, which occurs when inserting the cassette, is thus
excluded from any liability.
•
Please note the further information regarding the operation of the water vapor cassette.
11
rd
3 Step
4th Step
Glow Fire Humboldt
Stand: 08/2020
Version: 1.2