Filters; Important - Blueair HealthProtect 7400 Serie Manual Del Usuario

Filters

The air purifier is delivered with two pre-filters and one main SmartFilter filter installed. The
filters purify the air from both particles and gases. For best performance, clean the pre-filters
regularly and change the main filter when the air purifier indicates filter change. To find the
correct main filter for your air purifier, use the Blueair app or visit www.blueair.com.
The model number of your air purifier can be found on the rating label on the air purifier.
Blueair filter subscription program
Use the Blueair app or visit www.blueair.com to sign up for the Blueair filter subscription
program. (Not available in all markets)

Important!

Always turn off and disconnect the appliance from the power supply before
changing filters, cleaning or carrying out maintenance procedures.
Clean the pre-filters
For best performance, clean the pre-filters regularly.
Step 1
Push the left or right side
frame indent of the air
purifier to release the
pre-filter.
Step 3
Clean the pre-filter, by
wiping with a dust cloth
or vacuuming with a soft
brush attachment.
Step 5
Push the pre-filter to lock
it in position.
Step 2
Pull out the pre-filter from
the slot.
Step 4
Place the pre-filter back
into the slot.
20
Change the main filter
The air purifier calculates the remaining lifetime of the filter based on usage and sensor
readings, and indicates when it is time to change filter. The recommended time for filter
change is between 6-12 months depending on the indoor conditions.
A filter replacement indicator appears on the control panel when it is time to change filter.
Filter replacement indicator
(10-models and 40-models)
Important! Use only original Blueair filters suitable for the model to ensure proper function
and performance of the air purifier, and to qualify for full warranty coverage.
Step 1
Open the filter door.
Note! The air purifier
will turn off when the
filter door is opened.
Step 3
Note! Remember to
remove the protective
plastic from the new
main filter before use.
Insert the new main
filter.
Filter replacement indicator
(70-models)
Step 2
Remove the old main
filter by pulling gently on
to the two tabs.
Close the main filter
to seal the pollutants
inside.
Step 4
Close the filter door.
Note! The filter door
needs to be closed for
the air purifier to start
again.
21