Koenic KMF 240 Manual De Instrucciones página 19

Heating milk
1. Connect the power plug to a suitable
power outlet.
2. Open the lid and attach the stirring
attachment onto the rotating shaft.
3. Fill it with milk. The milk level must be
between the upper (MAX
marking (MIN).
4. Put the lid on firmly by pushing it down
slightly.
5. Align the milk frother to the positioning
stub at the base.
6. To begin heating, press the
button lights up red.
7. When the hot milk is ready, the product
turns off automatically. Unplug the power
plug from the power outlet.
8. Remove the milk frother from the base and
open the lid
Note
If you wish to prepare more hot milk froth or
more hot milk, let the milk frother cool down
for a few minutes before further use.
As long as the milk frother is hot, the
thermostat prevents its being used. You can
rinse the inside of the milk frother with cold
water to accelerate cooling.
Caution
Take care that the hot milk can cause severe
scalding.
Caution
Before exchanging accessory parts, the milk
frother must be turned off and removed from
its base.
KMF240_A5_130322.indb 19
1
) and lower
3
button. The
5
7
Exercise caution if you have prepared hot
milk froth, as it is hot and could scald you.
2
4
6
8
Caution
English
19
22/3/13 3:16 PM