BEFORE USING THE APPLIANCE
Important: Only use the appliance when properly assembled. The
appliance is provided with a safety switch. It can be switched on only
if the jug and the lid are in place. Should it be possible to switch on
the appliance without shaker recipient, you should send the appliance
to our customer service for control. Keep hands and utensils out of the
jug – danger of injuries!
1.
Remove all packaging materials and any transport safety devices.
2.
Before using the appliance for the first time, clean all parts (see "Cleaning").
3.
Put the plug into a wall socket.
Assembly of the jug
4.
Place the cutting knife (4) into the motor block (5).
5.
Fill the ingredients into the jug.
CAUTION!
6.
Do not exceed the maximum quantity of 1.5 litres.
7.
Press the lid (2) firmly on the jug. Lock the lid by letting it snap forward (pay
attention to the arrows on the lid).
8.
Place the measuring cup (1) into the opening and turn it clockwise.
Insert the jug
9.
Make sure that the switch is in 0/OFF position.
10. Place the properly assembled jug on the motor block (5) and turn it clockwise
until it locks into place.
24
Copyright UNOLD AG | www.unold.de