Functional Description And Specifications - Bosch HDC300 Instrucciones De Funcionamiento Y Seguridad

161992A079-HDC300_HDC300 1/10/14 1:06 PM Page 3

Functional Description and Specifications

To reduce the risk of injury user must read instruction manual for the use of the tool
W RNING
with this attachment.
FIG. 1
CHISEL
(NOT INCLUDED)
Disconnect the plug from
W RNING
the power source before
making any assembly, adjustments or
changing accessories. Such preventive
safety measures reduce the risk of starting
the tool accidentally.
The HDC300 dust extraction attachment
comes ready to install on any Bosch 12-15 lb
hammer.
FIG. 2
SAVE THESE INSTRUCTIONS
RUBBER
BUMPER
EXTENSION
TUBE
Assembly
HOUSING
EXTENSION
RM
DUST
PORT
Open fully the clamping band lever on the
attachment. Slide the clamping band over the
chuck and onto the hammer tube of the
hammer (Fig. 2). Close the clamping band
lever to secure the attachment to the tool.
Test to ensure no slippage (Fig. 3). If
necessary, you may have to tighten or
loosen the band within the clamp mechanism
to achieve the most secure fit.
FIG. 3
-3-
H MMER
D PTOR
CL MPING
B ND
CL MPING
B ND LEVER